9CBM concrete mixer upper body
|Reduction Gear||Italy PMP|
|Hydraulic Motor and Pump||Italy PMP|
|Diameter of Drum(mm)||2300|
|Drum Rotating Speed(rpm)||0-14|
|Water Tank Volume(liter)||450L|
|Remnant Ratio of Discharging(﹪)||≦1﹪|
|Material of Drum||520JJ （Or : BW300TP ）|
|Drum Shell Thickness(mm)||5|
|Material of Dish Head||16Mn|
|Dish Head Thickness(mm)||6|
-One manhole on the body.
-Strengthened rolling orbit.
-Scientifically designed steel structure chassis, Q345
-Two steel mudguards.
-One Charging bucket.
-One Discharging chute.
|Note: We can design & produce mixer drum according to your requirement.|
Concrete Mixer Bowl
3-Dimension designing software;
|Agitating capacity, m3||3.5-12|
|Drum diameter, mm||2168 or 2300|
|Water tank volume, liters||180-500 (L）|
|Discharged speed, cbm/min||2|
|Charging speed, cbm/min||3|
|Residual rate, %||＜1.0|
|Drum Shell Thickness(mm)||4，5， 6|
|Dish Head Thickness||8|
Design according to customer’s model bowl;Design according to customer’s drawing.
We use wearing proof steel plate(520JJ) for bowl and plates inside;The plate can be 6mm, 5mm, or 4mmPackage and deliveryWe use steel frame, bunding belts to fix the bowl in the container;We use Polyethylene foam board to protect the bowl from scratching and bumping;